TD-2 Condition monitoring system
Dual-channel Condition Monitoring System and protection
TD-2 Condition monitoring system is designed for control, continuous monitoring and protection of any rotating machines.
It can read any type of vibration sensors, Piezo IEPE or ICP, Electrodynamic Velocimeters or Proximitors.
It manages all the CEMB sensors and can be configured for each range of sensor of any manufacturer.
TD-2 interfaces with a supervision system either through 4-20 mA outputs or with connectivity MODBUS TCP-IP and it is designed to be connected to an ETHERNET network with others TD-2 or by the TDSP multi-channel system and export the data for remote vibration analysis and machine status
LED INDICATORS FOR STATUS OF CHANNELS
Threshold and alarms – Diagnostic
Input signals replicated on the BNCs for analysis with portable systems N130, N330, N600
ETHERNET PORT FOR COMMUNICATION
System Conguration – Data Export & Analysis – Balancing
2X ANALOG OUTPUT
4-20mA configurable or 0-10V configurable
2X BINARY INPUT
– Trip multiplier – Trip bypass
Configurable relay – NO/NC – With/Without memory – Setting time – Triggering condition AND/OR
Proximitor or photocell
VIBRATION + KEY PHASOR
Zero Speed Overspeed Reverse rotation
BALANCING 1,2 PLANE
|24 Vdc / 400 mA max
|-20°C ÷ +70°C
|DIN rail or or IP65 die-cast aluminum case (as option)