Cemb MOVE! is the new fully-automatic balancing machine designed for mobile service, but perfect also for workshops where space is limited thanks to its exceptional compact size. Its extraordinary versatility makes MOVE! usable anywhere, with the same performance as highend models.

2-hit technology data input

By manually rotating the wheel as indicated on the monitor, the LASER SPOTTER, in conjunction with the line MATCHING LASER, moves on the rim to measure its dimensions, eliminating the need for a gauge.

The confirmation and transmission of the data gathered by the two lasers to the software occurs by by pressing a pushbutton.

Rotating interface

Move! is equipped with rear knob for locking in position or setting intermediate positions as required; 90 degree rotation makes the weight carrier fully accessible.

Adhesive counter-weights positioning by means of SPOTTER Laser

Spotter Laser allows selecting the correction planes with maximum accuracy and then indicate the exact point of application of the weights.
The balancing procedure is further simplified by the brake that locks the wheel in the correction position.

Virtual Sonar

Virtual Sonar is the new CEMB software for a 3D wheel measurement which enables, in the absence of an actual sonar device, to detect the rim width. After having detected the first correction plane thanks to the automatic gauge, Virtual Sonar calculates the position of the external plane, according to the measured unbalance and the tolerance calculated with AutoAdaptive mode.

OPB: One plane balancing

OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.

Automatic Approach and electric brake

Once the measuring launch is completed, thanks to the Automatic Approach system, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing the operator to position it correctly with a little movement. The electromagnetic brake allows to lock the wheel in the exact weight position.

Single phase power supply 230V/1ph/50-60 hz o 115V/1ph/50-60 Hz
Max. absorbed power 0,65 kW
Balancing speed 100 rpm
Measuring cycle for 15 kg (33 lb) wheel 4.7 s
Measurement uncertainty 1 g
Avarage noise < 70 dB (A)
Rim width setting range 1.5” ÷ 20” / 40 ÷ 510 mm
Rim diameter setting range 10” ÷ 30” / 265 ÷ 765 mm
Max. wheel weight < 75 kg
Machine weight < 30 kg

UC20/GL40M 41FF034431

Standard adapter set with 3 cones, Ø45÷110mm and quick locknut with handwheel GLM40. Compulsory for machines used without wheel guard.

Version baseplate ideal for an easy installation in workshops with limited space on a van

Compared to a standard balancing machine:

  • 3 times more compact
  • up to 4 times lighter


930 x 451 x 380 mm
(with interface open at 90°)
755 x 451 x 380 mm
(with closed interface)

The device alone weighs less than 30 kg.
The optional baseplate has an additional weight of approx. 16 kg.

RL cup 41FF79255

Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).

UH20/2 41FF42048

For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.

Peugeot – Citroën kit 41FF73171

High precision set of 1 bush Ø 60 + 2 cones (Ø 62÷68mm and Ø 54÷60mm). Developed on Peugeot and Citroën specs.

VL/2 cone + G36 disc 41FF86174

Kit for light truck wheels (Ø 97÷170mm centre hole).

Renault kit 41FF77152

High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.

MT2 cone 40FF018655

High precision stepped cone for German cars. (Ø 56,5 / 57 / 66,5 / 70÷72,5 mm diam).

Mercedes kit 41FF88003

High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.

SR4 – SR5 – SR5/2 – SR/USA

Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.

    Name (mandatory):

    Email (mandatory):

    Phone (mandatory):

    Company (mandatory):

    Country (mandatory):


    I hereby declare to have read of the informative note according to art. 13 of G.D.P.R. and I give my consent for the treatment of my personal data.