SMX70
Automatic tyre changer with locking capacity up to 27"
Automatic tyre changer with reinforced structure designed to operate on cars and light commercial vehicles wheels up to 27″.
- Reinforced structure
Rear tilting post granting the maximum rigidity to prevent rim damage. Reinforced base vertical post structure and 60×60 mm horizontal arm grant maximum rigidity. Simultaneous vertical and horizontal arm locking system, vertical arm with spring return.
- Self-centering turntable
Self-centering turntable to ease bead-breaking of the second tyre bead. Rim locking through opposed-jaws device, with 80 mm diameter cylinders, which guarantees an optimal grip on all types of rims.
Clamping capacity 10″ – 27″.
New swivel fitting for a higher speed during rotation.
Jaws with replaceable tips.
- Motoinverter
Motor controlled by the new Motoinverter system with progressive variation of speed. The inverter board is installed on the machine, away from the engine to overcome vibration and heat problems. Low power consumption at rest (intelligent stand-by). High reliability and protection, with automatic alarm reset bringing the pedal to the resting position (no power outages required).
- Inflating device
Pedal-operated inflating device, manometer and CE-certified inflation pressure limiter.
- Bead breaker
Bead breaker with ergonomic arm to operate on wheels of 17” in width.
- Removable pedal unit
Body with removable pedal unit for easy maintenance.
Pedals positioned in line (rotation included).- TI Version (optional)
Version with an effective inflation device for bead seating integrated in clamping jaws.
- A Version (optional)
A-Version with pneumatic positioning of tool arm.
- Industry 4.0 kit (optional)
Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
Standard
Optional
| Clamping capacity | 10" - 27" |
| Internal clamping | 12" - 27" |
| External clamping | 10" - 24" |
| Max wheel diameter | 1170 mm (46") |
| Max wheel width | 430 mm (17") |
| Bead breaker force | 15000 N |
| Turntable speed | 0 - 16 rpm (1ph - Inverter) |
| Turntable speed | 8 - 16 rpm (3ph - 2 speed) |
| 1-Phase motor | 1.5 kW (Inverter) 230V 50-60 Hz |
| 3-Phase motor | 0.75 kW 400 V - 50/60 Hz (2 speed) |
| Operating pressure | 8 - 10 bar (116 - 145 psi) |
| Noise level | < 70 ± 3 dB (A) |
| Net weight | 270 kg |
Bead lever
Bead lever
Front head protection
Plastic protections for front mounting head (x2)
Rear head protection
Plastic protections for rear mounting head (x2)
HPX – ADVANCE
Professional lateral presser HPX-ADVANCE ideal to operate on particularly hard and large-sized Run-Flat and UHP Tyres. Robust structure with 2 air cylinders of 80 mm to avoid bendings. Equipped with rim pressing tool, standard bead pressing roller arm, bead pressing roller at 90° with pneumatic locking and possibility of operating under the tyre
HPX – FA
Additional bead-pushing device HPX-FA which assists during the mounting and demounting of the upper bead. It is recommended on tyres and rims with large diameters and sizes
HPX – STD
Professional compact side presser HPX-STD recommended to operate on particularly hard and large-sized Run-Flat and UHP Tyres. Compact structure, designed with 1 air cylider Ø 80 mm to avoid bendings
Wheel lift
Wheel lift
Roller board
Roller board to ease the bead breaking operations
TI External Kit
External inflating kit for tubless tyres including air tank to be fixed on the machine
Blade cover
Bead breaker blade protection
Michelin tyre inflating gun
Michelin approved professional tyre inflation gun
Run Flat Clamp
Run Flat Clamp
Jaws protections kit
4 jaws ALU protections kit
Scooter jaws
Jaws for scooter wheels 8” ÷ 14”
Motorcycle jaws
Jaws for motorcycle wheels 14″ ÷ 24”
Industry 4.0 Kit
Industry 4.0 Kit allows an optimal planning of the work activity inside the workshop.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
