The world's fastest fully-automatic wheel balancer with run-out measurement
The CEMB ER95 Plus provides a comprehensive range of features within a single 6.4″ measurement cycle: automatic acquisition of wheel dimensions and correction plans, measurement of unbalance, measurement of rim and tire runout, One Plane Balancing, Direct matching, Hubmatch®
- Ergonomic design
The ErgoFast range of wheel balancers has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch screen are only but a few of the advantages developed for our end users.
- 3D Laser Scan
– Touchless wheel distance and diameter measuring system which, combined with the external LA sonar for width measurement, detects with 3D precision the dimensions of any profile, even the most complex; no intervention of the operator.
– Advanced technology that speeds up the dimensions reading process without penalizing reliability and precision.
– Brighter laser pointer that grants an extreme accuracy during correction thanks to a clear indication of the application point for stick-on weights.
– Greatest robustness for a long lasting usage. No moving parts are exposed, risks of damages are reduced
– Easy maintenance
- Side Laser
Two laser beams indicate the exact 12 o’clock position to place clip-on weights. With these accurate reference points, any possibility of erratically placing counterweights is eliminated.
- EMS Sonar to measure the wheel eccentricity
Through high precision sensors, EMS Sonar (Eccentricity Measurement System) is able to detect variations in the distance between wheel centre and its external edges during rotation, allowing them to be corrected those irregularities that would make the vehicle less safe.
HubMatch detects the unbalance as well as the highest point of the wheel (1st harmonics), and displays it on-screen to enable mounting of wheel on vehicle so that simply matching mechanical clearances when positioning the rim on the hub will eliminate the eccentricity.
- OPB: One plane balancing
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.
- AutoAdaptive Mode
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.
- New automatic positioning system
The new electromagnetic brake on the DC motor ensures a doubled speed of automatic positioning and instant wheel locking at the weight application point.
- LED light
The ER95 is equipped with a built-in LED light designed to illuminate the work area inside the wheel, ensuring better visibility and precision during the placement of counterweights.
|Single phase power supply||115 / 230 V 50 / 60 Hz|
|Max. absorbed power||0,15 kW|
|Balancing speed||100 rpm|
|Measuring cycle for 15 kg (33 lb) wheel||4.7 s|
|Measurement uncertainty||± 0,5 g|
|Average noise||< 70 dB (A)|
|Rim width setting range||1.5” ÷ 20” or 40 ÷ 510 mm|
|Rim diameter setting range||10” ÷ 30” or 265 ÷ 765 mm|
|Min./Max. compressed air pressure||7 ÷ 10 Kg / cm2 | ~ 0.7 ÷ 1 MPa; | ~ 7 ÷ 10 bar; | ~ 105 ÷ 145 psi|
|Max. wheel weight||< 75 kg|
|Machine weight||170 kg|
Ring, quick locking sleeve SE2 and SE spacer
4 cones kit
4 cones Ø 45÷110 mm – pincer-hammer and 60 g. counterweight
Zero gravity effect
Wheel loading and removal without effort or adjustment
Wheel automatic lifting – Ideal centering and more accurate balancing.
Quicker than any other traditional lift – A single pedal controls the whole working cycle.
Electronic system with PLC.
Applicable to any CEMB balancing machine.
RL cup 41FF79255
Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).
Peugeot – Citroën kit 41FF73171
High precision set of 1 bush Ø 60 + 2 cones (Ø 62÷68mm and Ø 54÷60mm). Developed on Peugeot and Citroën specs.
VL/2 cone + G36 disc 41FF86174
Kit for light truck wheels (Ø 97÷170mm centre hole).
SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE
Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.
Renault kit 41FF77152
High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.
MT2 cone 40FF018655
High precision stepped cone for German cars. (Ø 56,5 / 57 / 66,5 / 70÷72,5 mm diam).
Mercedes kit 41FF88003
High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.
Professional lift with zero weight effect. Loading and removal of the wheel takes place without any effort or adjustment. PERFECT CENTERING: Any misalignment caused by the weight of the wheel on the shaft during centering is minimized. Lift up/down movement is mechanical, by compressed air.
For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.
Industry 4.0 Kit
Industry 4.0 Kit allows an optimal planning of the work activity inside the workshop.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.