ER63
New generation digital wheel balancer
It’s a versatile balancer, available also in pneumatic locking version and with LA Sonar for wheel width measurement. The laser line, supplied as standard, eases the positioning of adhesive counter-weights, increasing the balancing precision.
- Ergonomic design
The ErgoFast range of balancing machines has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.
- Detection of wheel data
The automatic gauge enables detection of distance and diameter (up to 28″ rims) with relative activation of desired balancing program (clip-on or stick-on weights). No error due to manual inputs possible. The machine enables the operator to work according to his preferences. The correct application of counterweights can be selected in different modes: with the accuracy of position repeater, with the speed of laser beam or the conventional 12 o’clock position.
- Automatic Approach
Once the measuring launch is completed, thanks to the Automatic Approach system, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing the operator to position it correctly with a little movement.
- Adhesive counter-weights positioning with laser beam
Wheel locked in position for weight application through electric brake and laser beam indicating position guarantee an easy and extremely quick balancing operation.
- Bloccaggio pneumatico (ER63SE)
Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions. (SE Version)
- LA Sonar
The LA sonar for width measurement enables an immediate entry of all necessary wheel data.
- Industry 4.0 Kit (optional)
Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
Standard
Optional
| Single phase power supply | 115 / 230 V 50 / 60 Hz |
| Max. absorbed power | 0,15 kW |
| Balancing speed | 100 rpm |
| Measuring cycle for 15 kg (33 lb) wheel | 4.7 s |
| Measurement uncertainty | ± 0,5 g |
| Resolution | 1 g |
| Average noise | < 70 dB (A) |
| Rim width setting range | 1.5” ÷ 20” oppure 40 ÷ 510 mm |
| Rim diameter setting range | 10” ÷ 30” oppure 265 ÷ 765 mm |
| Min./Max. compressed air pressure | 7 ÷ 10 kg / cm2 ~ 0.7 ÷ 1 MPa; ~ 7 ÷ 10 bar; ~ 105 ÷ 145 psi |
| Max. wheel weight | < 75 kg |
| Machine weight | 120 kg |
UC20/SE2 41FF52768
Standard equipment composed of: 3 cones Ø 45÷110 mm, quick locking sleeve SE2, width gauge, pincer-hammer and 60 g counterweight.
Zero gravity effect – Wheel loading and removal without effort or adjustment
PERFECT CENTERING
Wheel automatic lifting. Ideal centering and more accurate balancing
QUICK
Quicker than any other traditional lift. A single pedal controls the whole working cycle.
AUTOMATIC
Electronic system with PLC.
UNIVERSAL
Applicable to any CEMB balancing machine
RL cup 41FF79255
Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).
Peugeot – Citroën kit 41FF73171
High precision set of 1 bush Ø 60 + 2 cones (Ø 62÷68mm and Ø 54÷60mm). Developed on Peugeot and Citroën specs.
VL/2 cone + G36 disc 41FF86174
Kit for light truck wheels (Ø 97÷170mm centre hole).
SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE
Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.
Renault kit 41FF77152
High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.
MT2 cone 40FF018655
High precision stepped cone for German cars. (Ø 56,5 / 57 / 66,5 / 70÷72,5 mm diam).
Mercedes kit 41FF88003
High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.
Easyweight lift
Professional lift with zero weight effect. Loading and removal of the wheel takes place without any effort or adjustment. PERFECT CENTERING: Any misalignment caused by the weight of the wheel on the shaft during centering is minimized. Lift up/down movement is mechanical, by compressed air.
Industry 4.0 Kit
Industry 4.0 Kit allows an optimal planning of the work activity inside the workshop.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
