ER100 GT
The fastest diagnostics balancing machine in the world
The new version of the CEMB top-of-the-range wheel balancer is even faster and more efficient. In just 6,4 seconds and without any manual intervention on behalf of the operator the machine automatically detects all wheel dimensions, unbalance, internal and external wheel and rim eccentricity, tread-depth and conicity.
- Wheel structure analysis in just 6,4 seconds
Very often wheel vibrations are not caused by unbalances, but by a structural (geometrical) difformity of the wheel itself. ER100 GT in a few seconds of a single spin displays unbalance and eccentricity of tire and rim.
The operator will be allerted on the screen when the total eccentricity value exceeds the maximum tolerance admissible.
Should the run-out value be out of tolerance, simply pressing a push-button the operator can visualize the best tire/rim mutual positioning to drive the total eccentricity value within tolerance.
If the operator requires, during the same measuring cycle, ER100 GT can display also the values of conicity and tread-depth, detected through laser scan. The machine can also measure the eccentricity of the rim alone. A double scan on the two separate bead seating positions acknowledge the exact structure of the rim.- Ergonomic design
The new CEMB ER100 GT wheel balancer has an attractive and modern design, while retaining the characteristics of the ErgoFast range. The ErgoFast line has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch screen are only but a few of the advantages developed for our end users.
- 3D Laser Scan
– Touchless wheel distance and diameter measuring system which, combined with the external radial laser for width measurement, detects with 3D precision the dimensions of any profile, even the most complex; no intervention of the operator.
– Advanced technology that speeds up the dimensions reading process without penalizing reliability and precision.
– Brighter laser pointer that grants an extreme accuracy during correction thanks to a clear indication of the application point for stick-on weights.
– Greatest robustness for a long lasting usage. No moving parts are exposed, risks of damages are reduced
– Easy maintenance
- External laser scan
The external laser performs a complete wheel diagnosis including tyre conicity and wear analysis in three different areas.
- Side Laser
Two laser beams indicate the exact 12 o’clock position to place clip-on weights. With these accurate reference points, any possibility of erratically placing counterweights is eliminated.
- One plane balancing
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.
- AutoAdaptive Mode
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.
- HubMatch
HubMatch detects the unbalance as well as the highest point of the wheel (1st harmonics), and displays it on-screen to enable mounting of wheel on vehicle so that simply matching mechanical clearances when positioning the rim on the hub will eliminate the eccentricity.
- New automatic positioning system
An electromagnetic brake has been added on the DC motor, resulting in a doubled speed during positioning and an immediate lock of the wheel.
- Industry 4.0 kit (optional)
Industry 4.0 Kit allows a complete control of the workshop activity thanks to the possibility to plan the daily activity, by inserting the number of wheels, the start time of any activity and the machine that will be used to optimize the resources and eliminate waste of time.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.
Single phase power supply | 115 / 230 V 50 / 60 Hz |
Max. absorbed power | 0,15 kW |
Balancing speed | 100 rpm |
Measuring cycle for 15 kg (33 lb) wheel | 4.7 s |
Measurement uncertainty | ± 0,5 g |
Resolution | 0,5 g |
Average noise | < 70 dB (A) |
Rim width setting range | 1.5” ÷ 20” oppure 40 ÷ 510 mm |
Rim diameter setting range | 10” ÷ 30” oppure 265 ÷ 765 mm |
Min./Max. compressed air pressure | 7 ÷ 10 Kg / cm2 | ~ 0.7 ÷ 1 MPa; | ~ 7 ÷ 10 bar; | ~ 105 ÷ 145 psi |
Max. wheel weight | < 75 kg |
Machine weight | 220 kg |
SE kit
Ring, quick locking sleeve SE2 and SE spacer
4 cones kit
4 cones Ø 45÷110 mm – pincer-hammer and 60 g. counterweight
Zero gravity effect
Wheel loading and removal without effort or adjustment
PERFECT CENTERING
Wheel automatic lifting – Ideal centering and more accurate balancing.
QUICK
Quicker than any other traditional lift – A single pedal controls the whole working cycle.
AUTOMATIC
Electronic system with PLC.
UNIVERSAL
Applicable to any CEMB balancing machine.
Easyweight lift
Professional lift with zero weight effect. Loading and removal of the wheel takes place without any effort or adjustment. PERFECT CENTERING: Any misalignment caused by the weight of the wheel on the shaft during centering is minimized. Lift up/down movement is mechanical, by compressed air.
RL cup 41FF79255
Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).
UH20/2 41FF42048
For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.
Peugeot – Citroën kit 41FF73171
High precision set of 1 bush Ø 60 + 2 cones (Ø 62÷68mm and Ø 54÷60mm). Developed on Peugeot and Citroën specs.
VL/2 cone + G36 disc 41FF86174
Kit for light truck wheels (Ø 97÷170mm centre hole).
SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE
Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.
Renault kit 41FF77152
High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.
MT2 cone 40FF018655
High precision stepped cone for German cars. (Ø 56,5 / 57 / 66,5 / 70÷72,5 mm diam).
Mercedes kit 41FF88003
High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.
Industry 4.0 Kit
Industry 4.0 Kit allows an optimal planning of the work activity inside the workshop.
Interconnected system based on an operator panel assembled on the machine and a PC software (Tyre Shop 4.0) developed specifically for CEMB.