The integrated transmitter TR-P measures the absolute vibrations


The best value for money Transmitter

The peculiar characteristics of the polyamide construction and of the connection allow unique resistance to extreme ambient conditions, enabling an IP67 protection degree.

TR-P is available in different configuration versions and it does not need any set-up or maintenance

The transmitter, secured directly on machinery, generates an electric signal (4÷20 mA) which is proportional to vibration velocity or acceleration.

The transmitter is made of a stainless steel basis AISI 316L with machine connection thread and a polyamide molded body; the connection to the acquisition system is effected by means of a TE CONNECTIVITY SUPERSEAL connector.


Composition AISI 316L stainless steel thread basis
Polyamide body
Power supply 24Vdc (10 ÷ 35Vdc) current loop 4 ÷ 20mA
External connections TE SUPERSEAL 1,5 2 poles connector complete with cable
Electrical connections PVC bipolar shielded cable, conductors typical section 2x0,35 mm²
Environmental use field - 30°C ÷ + 120°C
IP 67 EN 60529/10.91 standard
Measure type Omnidirectional seismic (absolute vibration)
Dynamic field ± 15 g
Transverse sensitivity < 5 %
Linearity ± 2% - 75 Hz
Dynamic performances ±3% / 10Hz-1kHz - see figure 2
-3db / 3Hz – 1.5kHz
Insulation ≥10⁸ Ω between signal and container
Application axis Any
Standard machine connection thread M8x1,25
Maintenance No maintenance is needed
Parameters to be defined when ordering Measuring field
Cable length
Mounting torque 5÷10 N-m

Name (mandatory):

Email (mandatory):

Company (mandatory):

Country (mandatory):


I hereby authorize CEMB S.p.A. for the treatment of my personal data according to the current Italian directives (Law No. 196 of June 30th, 2003). (Compulsory)