For pump rotors
Field of application
Balancing machine for pump rotors, automatic static unbalance correction obtained by a milling or drilling unit.
– Manual loading and unloading. Prepared to communicate with an external loader.
– Automatic unbalance correction obtained by a correction unit able to machine milling arcs or to drill holes.
– The part under milling process rotates by the use of a rotary table equipped with six pneumatic clamps.
– The milling unit may operate inside an angle range of ± 45° so allowing to machine even inclined surfaces.
- Approx overall dimensions:
Width: 2600 mm
Depth: 1350 mm
Height: 2000 mm